Home
   >> Water & Wastewater
      >> Hydromation Deep Bed Filter
         >> Fuel Oil Removal
Project Profile:Aquifer Solutions Groundwater Remediation
 
PFD
DATA:
End User:
Location:
Commissioned:
.
Units:
Flow Rate:
Process: 		.
Aquifer Solutions, for Republic Paper Board
Commerce City, CO
Fall, 2003
(1) FDB-19P Complete with dedicated backwash supply pump for hot water backwash
300 gpm. (0.5 Million Gallons of Water per day)
Removal of No. 6 fuel oil from Groundwater
 
Process Description:
The system provided to Aquifer Solutions is a single filter used to remove No. 6 fuel oil from ground water.  Two (2) Horizontal wells are drilled the length of the designated remediation property, which at one time, was a paper mill.  The injection well provides the formation with hot water and the second production well is the conduit for oil and water to be removed from the ground.  The oil is first separated from the produced water with an IGF and then water is polished with the HDBF, prior to re-injection.

The produced water that is sent to the filter contains 10 ppm and 50 ppm of the fuel oil.  The effluent quality is less than 2 ppm fuel oil and TSS. This is a single unit installation with plastic tanks (shown above) used for backwash supply and backwash.

Once the fuel oil is removed from the ground and groundwater, the water rights to the onsite wells will be sold to the State of Colorado and then provided for use in agriculture.
 
Filtra-Systems Headquarters
23900 Haggerty Road
Farmington Hills, Michigan 48335
ph. 248-427-9090
fax. 248-427-9895 		Filtra-Systems - China
George Qiao - China Business Manager
1F, Bldg. 36#, 458 North Fu Te Road
Shanghai, Waigaoqiao, F.T.Z. 200131
ph. 011-86-21-58682809-114
fax. 011-86-21-58682803
©2007 Filtra-Systems Co. All rights reserved.