Tag Archives: Industrial Filtration Systems

Which Filtration System Is Right For Your Business?

Choosing the proper filter press is essential for an effective filtration system. It can often be difficult to choose a reliable filter press that is easily maintained, cost effective, and simple to operate. However, Filtra-Systems offers high-quality filter presses that pass the test of time, and are easily maintained and managed.

For instance, the Verti-Press Vertical Tower Filter Press is an effective and efficient system for slurry dewatering. The multiple stacked chambers allow for a more efficient process. One advantage is that individual chambers can be taken offline to enable continued runtime. Maintenance can be put off until the entire system is shut down, therefore the amount of lost working time is greatly reduced. Operating costs can be decreased and maintenance processes more easily managed.

Functional industrial filtration systems are essential for many processes. Filter cakes with remove as much water as possible from the solids in the treatment system are often desired. The Verti-Press has the power to create a high volume of solids and extract the most water possible.

Additionally, the Verti-Press Tower Filter Press has side seals for a fully enclosed filtrate design, which increases process safety by cutting down on potential process exposure outside of the filter. It is a highly efficient and highly functional industrial filtration system, and is at the forefront of filter press technology. Filtra-Systems has a commitment to continued research and progress in the filtration industry.

Contact a professional today to see how a Verti-Press can work for you.

4 Steps In Industrial Water Purification

Filtra-Systems knows what it takes to perform industrial water filtration. However, the full process can seem impenetrable to outside observers. To that end, here’s how a general industrial water purification system works.

Step One: Screening

Source water, either from a natural source or from an industrial one, will typically pass through a screen as it enters industrial filtration systems. This step is important because it keeps large material out of the water system, which can clog or otherwise disrupt the purification processes.

Step Two: Coagulation/Flocculation

The second step is usually the addition of chemicals to the water to be treated. This causes the formation of small yet sticky particles known as floc to begin forming. In turn this floc will attract larger and larger particles. This leads to the now-larger particulate to either sink to the bottom of the floc tank for conveyor removal, or rise to the top in order to be skimmed off.

Step Three: Filtration

Filtration is the critical part of the majority of industrial water purification systems. The water will be pumped through one of many different types of filters, leaving the accumulated floc behind in the filtration media. These filters, which can be made from cloth, crushed black walnut shell (BWS or NSF), sand, or carbon, trap and remove even more particulate as the water passes through them. For example, Filtra-Systems’ patented filtration processes involve the use of a bed of walnut shell media.

Step Four: Disinfection

The now-filtered water is then pumped into a closed tank where disinfectant chemicals such as chlorine are used to destroy any bacteria or other microorganisms that might have survived the filtration process. Other technologies include ultrafiltration (filters with pores of 0.2 micron or less), purification with ultra-violet light (UV), or reverse osmosis (RO).

Do you have more questions regarding the industrial water filtration process or what types of industrial purification systems might be a good choice for your organization? Contact Filtra-Systems today and we’ll be happy to share our 30 years worth of expertise in building and maintaining industrial water purification systems and solutions.